Assortment tools with tool trolley
Assortment tools with tool trolley
98/250QR
- Heavy-duty, robust tool trolley with 7 fully extendable drawers and central locking, including a 250-piece tool set.
- Extensive range for the highest demands: QR fine-tooth ratchets with extensions, sockets up to 32 mm, bit ratchet screwdriver and bit box, screwdriver, various pliers and much more.
- The patented QuickRelease locking system secures all components, from the ratchet to the extension to the socket.
- The robust 98/7 tool trolley has a static load capacity of up to 1,400 kg - the bottom drawer has a load capacity of up to 60 kg.
- The tools are securely integrated in durable, chemical-resistant TCS inlays with precise recesses and colour-coded signal areas.
Produkt-Varianten
| Product no. | Model | Length mm (L) | Width mm (b) | Height mm (h) | Number of drawers | Number of tools | Colour | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|
| 98830234 | 98/250QR | 651 mm | 1001 mm | 1020 mm | 7 | 250 | anthracite, RAL 7016 | 111000 g |
Technologien und Leistungsmerkmale
Modular Inlay System
Tool Control System
QuickRelease
Eigenschaften
- three-stage safety concept:
- central locking with a lateral cylinder lock and folding key
- individual locks prevent inadvertent opening during transit
- tilt protection - it is not possible to pull out several drawers at the same time
- stainless steel, reinforced handle
- all-round impact protection with impact damping
- tightly welded, scratch-resistant worktop, made of stainless steel
- oil and acid-resistant wheels (Ø 125 mm) with bearings protected from the ingress of dirt and fibres, and 2 parking brakes
- paper roll holder and spray can holder included
- 7 easily removable drawers, black RAL 9005, full-extension runners with bearing cage guide
- perforation on both sides for hooks No. 8031-8041, e.g., for larger tools
- can be equipped with STAHLWILLE TCS inlays
- safely integrated in the modular Tool Control System (TCS)
Key features of the tool trolley
1 tool trolley, anthracite No. 98/7 A PRO: 7 drawers
Contains 250-pieces:
96830264
11 sockets with hex 1/4" No. 40: 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm
17 sockets with hex 1/2" No. 52: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm
2 QuickRelease extensions 1/4" No. 405QR: L. 54; 150 mm
1 QuickRelease fine-tooth ratchet 1/4" No. 415QR N: L. 117 mm
1 bit adaptor, manual 1/4" No. 3116: L 25 mm
2 QuickRelease extensions 1/2" No. 509QR: L. 130; 255 mm
1 QuickRelease fine-tooth ratchet 1/2" No. 512QR N: L. 265.5 mm
1 square drive adaptor No. 410: 1/4 to 1/2"
1 square drive adaptor No. 513: 1/2 to 3/8"
1 bit holder 1/4" No. 412: L. 25 mm
96830265
2 bit ratchet screwdrivers 1/4" No. 4008: L. 95; 250 mm
1 bit holder 1/4" No. 4009: L. 176 mm
1 bit box No. 1206: 1 bit holder | L. 25 mm: SL4;5;6 mm (2x) | PH1;2;3 (3x) | PZ1;2;3 (3x) | T10;15;20;25;27;30;40 (2x) | T BO10;15;20;25;27;30;40 | INHEX 3;4;5 mm | L. 75 mm: SL6 mm | PH2;3 | PZ1;2 | T20;25 | 56-pieces
96830266
1 water pump pliers No. 6551: L. 240 mm
1 heavy-duty side cutter No. 6721: L. 180 mm
1 telephone pliers No. 6730: L. 200 mm
1 combination pliers No. 6700: L. 180 mm
96830267
16 combination spanners No. 13: 6; 7; 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm
1 adjustable spanner No. 4025: max. 34 mm
5 combination ratchet spanners, flat No. 17F: 8; 10; 13; 17; 19 mm
96830268
1 electrician's slotted screwdriver No. 4628: 0.4 x 2.5 x 60 mm
2 slotted screwdrivers No. 4620: 0.8 x 4 x 100; 1.6 x 10 x 200 mm
3 PH cross-head screwdrivers No. 4630: PH1; PH2; PH3
1 cable knife No. 12320: Blade length: 90 mm
1 tape measure No. 12935: L. 3 m
1 mini magnetic lifter No. 12600: 270 g
1 torch No. 13132: 130 lm
1 wooden folding ruler No. 13112: L. 2 m
1 ball-ended L-Key set TORX® No. 10771/8: T9; T10; T15; T20; T25; T27; T30; T40
1 ball-ended L-Key set hex No. 10767/9: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm
96830269
1 engineer’s hammer No. 10961: 500 g
1 dead blow hammer No. 10959: Ø 35 mm
1 flat chisel No. 102: W. 20; L. 175 mm
1 pin punch No. 108: Ø 6 mm
1 centre punch No. 105: Ø 10 mm
1 pin punch No. 109: Ø 3.4 mm
1 drift punch No. 104: Ø 4 mm
96830271
1 screw extractor set No. 900/6 T: M3-M4; M5-M7; M8-M11; M10-M12; M10-M12M14-M1; M18-M22
1 warding file set No. 12800: 6-pieces
1 flat file No. 12036: L. 260 mm
1 gasket scraper No. 12718: L. 265 mm
1 safety knife No. 12965: L. 165 mm
1 wire brush No. 12377: L. 270 mm
1 steel ruler No. 13110: L. 300 mm
1 hacksaw No. 12050: blade length: 300 mm
1 tungsten carbide scriber No. 12322: Ø 3.15 mm
1 wire cutter No. 13148: L. 150 mm
1 precision feeler gauge, 20 blades No. 11095: 0.05-1.00 mm
96830272
15 double open-ended spanners No. 12: 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm
13 combination spanners No. 14: 6; 8; 10; 13; 14; 17; 19; 21; 22; 24; 27; 30; 32 mm
96830273
4 circlip pliers No. 6543-6546: J2; J21; A2 A21
96830274
9 screwdriver sockets TORX® 1/2" No. 54TX: T20; T25; T27; T30; T40; T45; T50; T55; T60
10 screwdriver sockets INHEX 1/2" No. 54: 4; 5; 6; 7; 8; 10; 12; 14; 17; 19 mm
2 screwdriver sockets TORX® 1/2" No. 1054TX: T30; T50
2 INHEX screwdriver sockets 1/2" No. 1054/2054: 6; 8 mm
4 screwdriver sockets INHEX 1/4" No. 44: 3; 4; 5; 6 mm
8 screwdriver sockets TORX® 1/4" No. 44KTX: T8; T10; T15; T20; T25; T27; T30; T40
5 screwdriver sockets INHEX 1/4" No. 44K: 3; 4; 5; 6; 8 mm
Produkt-Highlights
Complete solution for industry.
Our extensive range includes high-quality tools for a wide range of applications, such as vehicle maintenance, general repairs or assembly and disassembly work. It includes wrenches with various sizes, sockets up to 32 mm, a large bit set, a wide selection of pliers and much more. With this equipment, you get a broad base for a wide range of applications in the automotive, electrical and mechanical engineering industries.
Takes on anything.
High-quality materials such as the tightly welded stainless steel tray provide the durability that is typical of STAHLWILLE, and prevent liquids from penetrating the interior of the trolley. The working area of 740 x 570 mm is particularly suitable for working on large components. Thanks to its robust design, the 98 PRO achieves a static load-bearing capacity of 1,400 kg. The drawers can be loaded with up to 40 kg thanks to stiffening, and the bottom drawer can even be loaded with up to 60 kg.
Full configuration as standard.
Whether paper roll and spray can holders, all-round impact protection with shock absorption, perforations on both sides for attaching accessories, locking brakes or oil and acid-resistant smooth-running castors (Ø 125 mm) with thread protection. Our tool trolley comes with many features as standard.
